Checking the Cavity

The first step in checking for cavities is to visit a dentist. While many people wait until their tooth starts hurting to visit a dentist, cavities are usually easily noticeable without the use of probing instruments. Some cavities can even be seen with the naked eye, while others require more sophisticated tools. A dentist can tell if you have a cavity by looking for a dark spot or other visible indications of decay. Hopefully, this article will help you find the cause of your toothache and get it treated quickly.

Dental probe

A dental probe is one of the instruments that a dentist uses to examine a tooth for cavities. It is thin with a pointed tip that helps the dentist probe for soft spots on the tooth. If a tooth shows a soft spot, it likely has a cavity. The probe tip will stick to the decayed area, while healthy areas resist gentle tapping. Unlike a dental file, the probe is not designed to remove calculus or remove a cavity.

A dental probe is the instrument used to measure the depth of the pocket around a tooth. It is not a common dental tool and should only be used by a dentist during a comprehensive oral exam. Probing measurements should be less than four millimeters. If the measurement is more than four millimeters, the patient should seek professional treatment. Once the pockets become deeper than four millimeters, the bacteria are trapped and will begin to cause inflammation and pain. In advanced cases, a cavity may even lead to tooth loss.

Using a cavity inspection camera

Using a cavity inspection camera is a great way to make sure the walls of your home are free from any decay. The camera is built into a sturdy, 300mm stainless steel probe, and is a great tool for checking the wall cavities and other hidden spaces. The camera also offers 380 TV Lines of resolution and a 90 degree viewing angle. Once you’ve finished your cavity inspection, you can export images, videos, or both to your computer.

Seeing a dark spot

not Cavity of teeth

If you’re checking the cavity and notice a dark spot, it’s important to get to the bottom of the issue quickly. This dark spot may be the result of tooth decay or other medical conditions. These include Addison’s disease and Peutz-Jeghers syndrome. A visit to your primary care physician can help diagnose the problem and prescribe treatment. In some cases, however, the dark spot could simply be a surface stain. The camera is also water resistant (IP67) and features two high-intensity LEDs for illumination. The camera is powered by four AA batteries and provides three hours of operation.

Depending on the size and depth of your cavity, a dark spot on the surface of your tooth may be an indication that you have a cavity. It can also be the result of an injury or medication. A cavity will often cause tooth pain. In addition to the discomfort, sensitivity to hot and cold can be an indication of tooth decay. By following proper oral care practices, you can prevent cavities and prevent painful tooth decay.

Using a dental x-ray

Although dental x-rays involve exposure to radiation, the risks are not too high when used occasionally. In fact, a typical dental x-ray session only exposes the patient to about 1/33 of the radiation found in natural sources over a year. With modern digital x-ray technology, exposure is further reduced. Here are some facts to keep in mind when getting a dental x-ray: The camera is battery powered, and comes with a 5-inch LCD screen with anti-glare coating for optimal viewing.

A digital x-ray is much easier to store than traditional x-rays. Instead of being printed on film, digital images are saved on a computer. This allows the images to be transferred to another dentist or specialist if you change your dentist. Another benefit of digital radiography is its lower cost. Traditional x-rays require film to be developed and may require additional appointments. However, digital radiography saves the time of the patient because the image is projected into the computer as soon as the sensor is in the mouth.

Using a laser to detect cavities

Using a laser to detect cavities is a more efficient way to diagnose tooth decay than x-rays and visual inspection. Early detection allows for less invasive treatment options and smaller fillings. In addition, it is a more comfortable and faster way to get an accurate diagnosis than x-rays. You should consider visiting a dentist with this tool to reduce your radiation exposure. However, you should remember that not all cavities can be detected with this tool. The camera can be used in brightly lit areas as well as in direct sunlight. 강남치과 The camera is equipped with features such as Image Still, Image Zoom (1-3x), and 180-degree image flip.

The concept behind laser cavity detection is based on the fact that healthy tooth structures reflect light differently than decayed teeth. Healthy teeth are easy to penetrate, while dental cavities are difficult to penetrate. By using a laser cavity detection machine, a dentist can identify the presence of cavities in the mouth’s hard-to-reach zones. The device then emits fluorescent light when abnormalities are detected. A dentist can then determine which treatment is most effective for each individual patient.